Arrow build for the Hoyt Alpha AX-3 29 SD (Short Draw) (2026) — spine, weight, speed
The short answer. On a Hoyt Alpha AX-3 29 SD (Short Draw) (2026) at 70 lb and a 27″ draw, the engine builds a 382-grain arrow on 300 spine flying about 267 fps, making 61 ft‑lb of kinetic energy, 0.45 slug‑fps of momentum, at 13.3% FOC. Every number below is this engine's output for this exact bow — not a chart, not a rule of thumb, and not copied from anybody's spec sheet.
The Hoyt Alpha AX-3 29 SD (Short Draw) (2026) is rated at 310 fps IBO with 80% let-off. That IBO figure is measured with a 350‑grain arrow at 30 inches and 70 pounds — a test arrow, not a hunting arrow. The tables below show what the bow actually does with an arrow you would take into the woods, at every draw weight it offers.
The recommended starting build
- Spine: 300 — engine-picked for 70 lb at 27″ with a 100‑grain point
- Total arrow weight: 382 grains
- Estimated speed: ~267 fps
- Kinetic energy: 61 ft‑lb
- Momentum: 0.45 slug‑fps
- FOC: 13.3%
▸ Open this exact build in The Forge — free, and it loads with every component above already selected.
Every draw weight, side by side
Spine is not a property of the bow. It is set by draw weight, arrow length and point weight acting together, which is why the engine's pick changes down this column. If your bow is not maxed out, read the row that matches your actual poundage.
| Draw weight | Spine the engine picks | Total arrow weight (gr) | Speed (fps) | Kinetic energy (ft‑lb) | Momentum (slug‑fps) | FOC |
|---|---|---|---|---|---|---|
| 30 lb | 500 | 318 | 213 | 32 | 0.30 | 16.0% |
| 35 lb | 400 | 336 | 216 | 35 | 0.32 | 15.2% |
| 40 lb | 400 | 336 | 226 | 38 | 0.34 | 15.2% |
| 45 lb | 340 | 356 | 227 | 41 | 0.36 | 14.3% |
| 50 lb | 340 | 356 | 237 | 44 | 0.37 | 14.3% |
| 55 lb | 340 | 356 | 247 | 48 | 0.39 | 14.3% |
| 60 lb | 340 | 356 | 257 | 52 | 0.41 | 14.3% |
| 65 lb | 300 | 382 | 257 | 56 | 0.44 | 13.3% |
| 70 lb | 300 | 382 | 267 | 61 | 0.45 | 13.3% |
What one inch of draw length costs
| Draw length | Spine | Weight (gr) | Speed (fps) | Kinetic energy (ft‑lb) | FOC |
|---|---|---|---|---|---|
| 25″ | 300 | 382 | 247 | 52 | 13.3% |
| 26″ | 300 | 382 | 257 | 56 | 13.3% |
| 27″ | 300 | 382 | 267 | 61 | 13.3% |
What this build is cleared for
We grade against five energy floors and we tell you which of them are Easton's numbers and which are ours. Three come from Easton's game-class chart, which Easton retired in 2012 and which we reproduce from archive captures on the kinetic energy chart by game class. Two are ours, labelled as ours.
| Game class | Floor (ft‑lb) | Whose number | This build at 61 ft‑lb |
|---|---|---|---|
| Small game | 15 | judged | clears by 46 |
| Deer / antelope | 25 | charted | clears by 36 |
| Elk / bear / boar | 42 | charted | clears by 19 |
| Heavy game | 50 | derived | clears by 11 |
| Big game | 65 | charted | short by 4 |
Energy is a floor, not a plan. It tells you whether an arrow has enough to work with; it does not tell you where to put it. For that you want the target size — broadside vital dimensions for 61 species are on the vital zone size page, with the sourced shoulder heights they derive from.
Tuning this bow: Hoyt XTS Tuning System
This is one of the 2026 Hoyts with the XTS Tuning System, which is the only factory system here that corrects BOTH horizontal and vertical paper tears without a press. If you are chasing a stubborn nock-high tear that rest height will not fix, XTS is the adjustment to reach for before you start twisting cables.
The full tear-to-cause doctrine, and the cam-lean correction system for all 196 bows in our catalogue that have one, is on the bow tuning page.
Bow specifications
- IBO speed: 310 fps
- Let-off: 80%
- Axle-to-axle: 29.5″
- Mass weight: 4.25 lb
- Draw weight range: 30–70 lb
- Draw length range: 23–27″
Common questions
What arrow spine do I need for a Hoyt Alpha AX-3 29 SD (Short Draw) (2026)?
At 70 lb and a 27-inch draw with a 100-grain point, the engine picks 300 spine for a 382-grain finished arrow. Drop to 30 lb and the pick moves to 500 spine at 318 grains. Spine is not a property of the bow — it is set by draw weight, arrow length and point weight together, which is why the table above shows every draw weight this bow offers rather than one number.
How fast does a Hoyt Alpha AX-3 29 SD (Short Draw) (2026) shoot a real hunting arrow?
About 267 fps with the 382-grain build above at 70 lb and 27 inches. The bow's advertised 310 fps IBO is measured with a 350-grain arrow at 30 inches and 70 pounds, which almost nobody shoots. The gap between 310 and 267 is not the manufacturer lying — it is the difference between the IBO test arrow and a huntable one.
Is this arrow heavy enough for elk?
Yes on energy: 61 ft-lb against the 42 ft-lb elk, black bear and boar floor — a margin of 19 ft-lb. That 42 is Easton's charted figure, not ours. It also clears the 25 ft-lb deer and antelope floor. Energy is only half the question though: penetration on elk is driven by momentum and FOC as much as by kinetic energy, and this build sits at 0.45 slug-fps and 13.3% FOC.
What game does this Hoyt Alpha AX-3 29 SD (Short Draw) (2026) build clear?
At 61 ft-lb it clears small game, deer / antelope, elk / bear / boar, heavy game. It falls short of big game. Two of those floors are Easton's charted numbers (25 and 42 ft-lb), one is Easton's top band (65), one is ours placed between charted anchors (50), and one is ours with thin evidence that we label as such (15). We publish which is which rather than presenting all five as industry standard.
How do I fix a left or right tear on a Hoyt Alpha AX-3 29 SD (Short Draw) (2026)?
Correct it at the cam, not at the rest. This bow uses Hoyt XTS Tuning System, so cam lean is adjustable on the bow itself. Chasing a horizontal tear with rest windage moves the arrow's launch point without fixing what is throwing it, which is why the tune looks fine on paper and falls apart when you screw on a fixed-blade broadhead.
Where do these numbers come from?
The same physics engine that runs The Forge, with no hand-tuning and no chart lookup. Launch speed is IBO-corrected for your actual draw weight, draw length and arrow mass. Kinetic energy and momentum use the Easton method. The spine pick comes from a model validated against the published manufacturer charts — 98% agreement with Easton, 85% with Gold Tip. Bow specs (310 fps IBO, 80% let-off) are the manufacturer's published figures. When you chronograph your real bow, your measured speed replaces the estimate everywhere.
Method, and what we are not claiming
Launch speed is the bow's published IBO corrected for your actual draw weight, draw length and finished arrow mass. Kinetic energy and momentum are the Easton method. The spine pick comes from a coefficient model published in full on the spine what-if page, including its measured agreement with each manufacturer's chart.
What we are not claiming: that this is the arrow you should shoot. It is the arrow this engine builds from a sensible hunting default on this bow, so that the numbers on this page are reproducible rather than editorial. Your draw length, your point weight and your broadhead all move every figure here, and the permalink above opens the build so you can move them.
Built by archnerds, for archnerds — The Forge by Sparrow Expeditions.