Field Notes 16 November 2026 bow setup
90% Let-Off Is a Sales Feature, Not a Shooting Feature
Every new-model season somebody walks into a shop, draws a 90% let-off bow off the wall, and grins. It feels like nothing. Like you could hold it through a phone call. And the guy behind the counter grins too, because that grin sells bows.
I'm going to say it plainly. I would never set up a bow above 80% let-off. My sweet spot is 70 to 75, whatever gets me to about 20 or 21 pounds of holding weight. Elite and PSE both sell 90% options on some of their hunting rigs, and I skip them. The Hoyt and Mathews flagships top out around 85, which is fine. Past that you're paying for a feeling at the counter, not a better shot in the tree.
Do the math on your own bow
Take a 70-pound bow. At 90% let-off you're holding 7 pounds at full draw. At 85% it's about 10 and a half. At 75% it's 17 and a half, and at 70% it's 21.
Seven pounds sounds great until you try to aim with it. There's almost nothing in the string pulling back against you. Nothing to push into. Your bow arm and your back have no load to settle against, so the pin wanders, and you start steering it instead of letting it float. And a hinge release, which wants a steady rearward pull to go off clean, turns mushy when there's barely any weight in the system to pull through.
Twenty pounds is different. You feel the wall. You have something to lean on. The bow sits in your hand like it means it, and your expansion has a load to work against. That's the whole game with a surprise release. Holding weight isn't the enemy of a good shot. It's what the good shot is built on.
One more thing. The let-off printed on the module is a rating, not a measurement. Hang your bow on a draw board with a scale and read the holding weight yourself. I've seen "80%" setups that held 12 pounds and "75%" setups that held 19. The number on the scale is the one your back has to live with.
"But I can hold it longer when the buck hangs up"
This is the argument everybody makes, and I get it. You draw on a buck at 30 yards, he stops behind a cedar, and now you're sitting at full draw waiting for him to take two more steps. Lower holding weight means you last longer.
Except you don't, not really. What gives out first in that moment isn't your muscles. It's your shot. I've watched it at the range more times than I can count. A guy on a 90% bow holds forever, and somewhere past 20 seconds he starts creeping forward without knowing it, because there's no wall pressure telling him where full draw is. The arrow goes low. On a target that's a 7 instead of a 10. On a deer standing at 24 yards that's brisket, and a long night with a flashlight.
The fix is usually boring. Put 75% mods on the bow, give it about three weeks of range time until it stops feeling strange, and the creeping goes away, because now when you relax even a little the bow tells you.
If you need to hold for 45 seconds, train for it. Draw on a target, start a timer, hold for 30, 40, 50 seconds, then shoot. Twenty pounds is plenty holdable when you've practiced it. Cold too. Sit in a stand in December with a 21-pound hold and you'll be fine. Sit there with a 7-pound hold and you'll be fine right up until you have to execute a clean shot, which is the only part that matters.
Where low let-off bites you that nobody talks about
Draw length gets sloppy. With a soft wall and almost no holding weight, a lot of guys end up a little long and never notice, because nothing pushes back. Anchor drifts, peep alignment drifts, and you start chasing your sight instead of fixing your form.
Target panic finds you faster too. When the pin moves more, the urge to punch it the instant it crosses the spot gets stronger. I've had this conversation with more than one guy who swore his panic came out of nowhere. It didn't. He bought a bow that made his pin dance and his brain started grabbing at the shot.
Look at what the guys who shoot for a living run. Levi Morgan, Dudley, Gillingham. Nobody at the top of 3D or spots is chasing 90% let-off. They want a solid wall and real holding weight because the shot holds together under pressure that way. That should tell you something about what helps when a deer is standing there.
And yeah, if you have a shoulder that's beat up, or you're coming back from surgery, lower holding weight might be the right call for you. That's a medical choice, not a performance one. Make it on purpose and know what you're giving up.
Swap the mods, then re-check everything
If you're running 85 or 90 and want to try something lower, most cams let you swap a module or move a post. Do it at the shop if you don't have a press. Then treat it like any other change. Let-off changes can shift your speed a few fps, nudge your draw length, and move your peep. Re-check timing, re-paper, re-chrono.
Here's what I'd do this week. Shoot your current setup at 40 yards, five ends of three, and log every group in the Range tab in The Forge. Swap to the lower let-off, give it two weeks so it stops feeling weird, then shoot the same five ends and log those. Let the groups pick the winner, not the feel at the counter.
And when you're done, run a new speed through the Chrono tab and reprint your sight tape. A different module can mean a different arrow speed, and your marks are only as honest as the number behind them.